Model Maintenance Schedule
Husqvarna TE 300 Maintenance Schedule
The Husqvarna TE 300 is a fuel-injected, oil-injected 2-stroke enduro bike. These are the service intervals from the 2026 Husqvarna owner's manual in engine hours.
Key Intervals At A Glance
- Oil: Change the gear oil, every 45 hours or every 24 months.
- Air filter: Clean the air filter and air filter box, every 15 hours or every 24 months.
- Top end: Perform minor engine service (change the piston; check the cylinder head; change the O-rings, header and the cylinder head), every 45 hours.
- Fork: Carry out fork service. (All standard models except 250 US), every 45 hours.
How The Husqvarna Schedule Works
The Husqvarna owner's manual lays out service in five columns: after one operating hour, every 15 operating hours, every 45 operating hours, every 90 operating hours and every 24 months. An open circle in the table marks a one-time job and a filled circle marks a repeating one. The manual also warns that harsh conditions such as heavy rain, mud, sand, snow, extreme temperatures or frequent full load can call for shorter intervals, and that intervals can differ by country.
For this model, the gear oil is changed every 45 hours or every 24 months; the minor engine service, which includes a new piston, is every 45 hours; the major engine service, which covers the bottom end, is every 90 hours. Everything else hangs off those service levels.
Husqvarna TE 300 Service Intervals By Hours
The table below lists the core service items from the maintenance schedule in the Owner's manual 2026 TE 250 / TE 300 / TE 300 PRO (Item no. 3402893en). Task wording follows the manual. Where the manual gives both an hour and a calendar interval, do the work at whichever comes first.
| Service task | Interval | First service |
|---|---|---|
| Change the brake fluid for the front brake. | Every 90 hours or every 24 months | None listed |
| Change the brake fluid for the rear brake. | Every 90 hours or every 24 months | None listed |
| Change the hydraulic clutch fluid. | Every 90 hours or every 24 months | None listed |
| Change the gear oil. | Every 45 hours or every 24 months | After 1 hour |
| Check the swingarm bearing for play. | Every 45 hours | None listed |
| Check the shock absorber linkage. | Every 15 hours | None listed |
| Check the wheel bearing for play. | Every 15 hours | None listed |
| Check the spoke tension. | Every 15 hours | After 1 hour |
| Check the chain, rear sprocket, engine sprocket, and chain guide. | Every 15 hours | After 1 hour |
| Check the chain tension. | Every 15 hours or every 24 months | After 1 hour |
| Change the spark plug and spark plug connector. | Every 45 hours | None listed |
| Change the fuel filter. | Every 90 hours or every 24 months | None listed |
| Clean the air filter and air filter box. | Every 15 hours or every 24 months | None listed |
| Change the damping material on the main silencer. | Every 90 hours | None listed |
| Carry out fork service. (All standard models except 250 US) | Every 45 hours | None listed |
| Carry out fork service. | Every 45 hours | None listed |
| Service the shock absorber. | Every 45 hours | None listed |
| Check all screws, nuts, and hose clamps for a tight fit. | Every 15 hours or every 24 months | After 1 hour |
| Check the coolant level. | Every 15 hours | After 1 hour |
| Change the coolant. | Every 24 months | None listed |
| Check the steering head bearing play. | Every 15 hours | After 1 hour |
| Lubricate the steering head bearing. | Every 45 hours or every 24 months | None listed |
| Check the reed valve housing, diaphragm, and intake manifold. | Every 45 hours | None listed |
| Change the oil pump; clean the oil screen. | Every 90 hours | None listed |
| Clean the oil screen in the oil tank. | Every 90 hours | None listed |
| Perform minor engine service (change the piston; check the cylinder head; change the O-rings, header and the cylinder head) | Every 45 hours | None listed |
| Perform major engine service including removing and installing the engine (change the connecting rod, big (bottom) end bearing and crankshaft pin; check the transmission and shift mechanism; replace all engine bearings, radial shaft seals and gaskets) | Every 90 hours | None listed |
The manual is the authority. Check the edition for your exact model year before ordering parts, and shorten intervals for mud, sand, heat or heavy loads.
Fluids And Capacities
| Item | Specification |
|---|---|
| Gear oil quantity (2-stroke transmission) | 0.80 l (0.211 liq. galUS), Engine oil 15W/50, partially synthetic |
| Gear oil specification | SAE 15W/50, JASO T903 MA2, partially synthetic (Motorex Top Speed 4T recommended) |
| 2-stroke oil tank capacity (oil injection) | approx. 0.8 l (0.21 liq. galUS), fully synthetic 2-stroke engine oil |
Ownership Notes
Earlier model years were sold as the TE 300i. The 2026 manual covers the TE 250, TE 300 and TE 300 Pro, so check the manual for your exact year if your bike carries the older name.
Like other enduro 2-strokes in the family, the TE 300 runs on longer intervals than the TC race bikes: gear oil, the minor engine service and suspension service on the 45-hour line, and the major engine service at 90 hours. The oil pump and oil tank screen are also on the 90-hour line.
Track The Husqvarna TE 300 Schedule Automatically
MotoMind tracks these intervals automatically by engine hours. Add your Husqvarna TE 300 to the garage, set each task to the interval in the table above, and update hours from your hour meter or the GPS ride tracker. Every task then shows as upcoming, due now or overdue, and your completed service builds a history you can export as a PDF when you sell the bike.
Other Husqvarna Schedules
Compare with Husqvarna FC 450, Husqvarna FC 350, Husqvarna FC 250, Husqvarna TC 250, Husqvarna TC 125, or browse every model in the maintenance schedules hub.
FAQ
How often should I change the gear oil on a Husqvarna TE 300?
The 2026 Husqvarna owner's manual lists “Change the gear oil” every 45 hours or every 24 months, with the first one after 1 hour. Ride in mud, sand or heat, or race hard, and shorten the interval.
When does a Husqvarna TE 300 need a new piston?
The 2026 Husqvarna owner's manual lists “Perform minor engine service (change the piston; check the cylinder head; change the O-rings, header and the cylinder head)” every 45 hours. Track engine hours closely so the top end is replaced on schedule rather than after a failure.
How often should I clean the air filter on a Husqvarna TE 300?
The 2026 Husqvarna owner's manual lists “Clean the air filter and air filter box” every 15 hours or every 24 months. In dusty or sandy conditions, inspect it after every ride.
How often does the Husqvarna TE 300 suspension need service?
The 2026 Husqvarna owner's manual lists “Carry out fork service. (All standard models except 250 US)” every 45 hours.
Can an app track the Husqvarna TE 300 maintenance schedule for me?
Yes. MotoMind tracks these intervals automatically by engine hours. Enter your Husqvarna TE 300's hours or log rides with the GPS ride tracker, set the intervals from this table, and MotoMind shows what is upcoming, due or overdue.
Track The Husqvarna TE 300 By Engine Hours
MotoMind tracks these intervals automatically by engine hours, so your Husqvarna TE 300 gets oil, filters, top end and suspension service on time.
